specification control drawing tyco electronics corporation 305 constitution drive menlo park, ca 94025, usa raychem products title : stub splice sealing system, nickel plated crimp unless otherwise specified dime nsions are in millimeters. inches dimensions are between brackets. document no.: d-436-0119 tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron tyco electronics reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. date: 14-nov.-00 doc issue: 1 drawn by: m. foronda replaces: n/a dcr number: d001277 prod. rev. b scale: none size: a sheet: 1 of 1 if this document is printed it becomes uncont rolled. check for the latest revision. materials 1. insulation sleeve: heat-shrinkabl e, transparent blue, radiation cro ss-linked modified polyvinylidene fluoride. 2. meltable inserts: low-outgassi ng thermoplastic, color-natural. 3. seamless stub splice: base metal: copper alloy 101 or 102 per astm b-75. plating: nickel plated per qq-n-290. color code: red stripes. cma range: 300 to 1510 circular mils. application 1. this system is designed to provide an environmentally resistant splice in wires rated for at least 125 c. splices may be either two wire stub splices or 1 to 1 or 2 to 1 parallel spli ces. if two wires exit from one end, they must have a combined outer diameter of less than 2.03 (0.080). 2. parts when installed as detailed on raychem specification control drawing d-436-75/-76 shall meet performance requirements of mil-s-81824. 3. acceptance testing shall be in accord ance with paragraph 4.6 of mil-s-81824.
|
